ÇѱæÁ¤°ø Á¦Ç°¼Ò°³ ¿¡¾î¸®½ºÆßÇÁ
Overhead Spray Machine
HK-BP-3000
  • Prevent from musculoskeletal system disorder(Industrial accident)
  • Uniformity of coating
  • Cut down the cost of labor
  • Adjustment of working velocity
  • Maximize productivity
  • Paint reduction(25~30%)
  • Silence working(DC 24V)
  • Adjustment of width range according to tip size
  • Optional 2 guns, 3 guns, 4guns according to purpose of use
  • Application : Coating for the lower part of mega block
  • Technical Data
Part No. (HK-BP-3000)
Velocity 5~20m/min. Working Hour 8hours(Single charge) Battery 12V / 250AH / 2EA
Width Range 250~400§® Recharger 1ø / 220V
Height Range 1,300~1,900§® Dimension(L×W×H) 110×70×170(220)§¯    
Hydraulic Pump
HK-HP-1000
  • Ultra high pressure pump of 560kgf/cm©÷
  • Possible using 2 guns
  • Low pulsation comparing with pneumatic pump
  • Wide pressure adjusting range
  • Automotive electronic component for prevention of explosion specification
  • Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint
  • Application : Shipyards, Construction, Metal structure, Heavy anti-corrosive coating, High viscosity coating
  • Technical Data
Part No. (HK-HP-1000)
PressureRatio 2.8:1 3.4:1 3.7:1 Operating Fluid Pressure 462kgf/§² 476kgf/§² 481kgf/§² Electric Motor 7.5kw×4p
Max. Delivery 13§¤/min. 9.5§¤/min. 9§¤/min. Max. Hydraulic Pressure 200kgf/§² 200kgf/§² 200kgf/§² Dimension(L×W×H) 110×65×120§¯
Output per Cycle 250cc 190cc 180cc Max. Fluid Pressure 560kgf/§² 680kgf/§² 740kgf/§² Weight Appx. 400§¸
Operating Hydraulic Pressure 165kgf/§² 140kgf/§² 130kgf/§² Power Source 3ø×220V / 380V / 440V Noise 70~75dB
Airless Pump 73:1
HK-731
  • Low-noise design to remove hearing trouble
  • High pressure pump of 474kgf/cm©÷
  • Reduced freezing with mounted air jet system
  • Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint
  • Application : Shipyards, Construction, Metal structure, Heavy anti-corrosive coating, High viscosity coating
  • Technical Data
Part No. (HK-671)
Pressure Ratio 73:1 Max. Discharge Pressure 474kgf/§² Weight 100§¸
Max. Delivery 26§¤/min. Noise 70~80dB
Operating Air Pressure 3~6.5kgf/§² Dimension(L×W×H) 75×80×120§¯ Air Motor Stroke 120§®
Airless Pump 72:1
HK-721
  • Low-noise design to remove hearing trouble
  • High pressure pump of 468kgf/cm©÷
  • Reduced freezing with mounted air jet system
  • Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint
  • Application : Shipyards, Construction, Metal structure, Heavy anti-corrosive coating, High viscosity coating
  • Technical Data
Part No. (HK-721)
Pressure Ratio 72:1 Max. Discharge Pressure 468kgf/§² Weight 95§¸
Max. Delivery 24§¤/min Noise 70~80dB
Operating Air Pressure 3~6.5kgf/§² Dimension(L×W×H) 75×80×117§¯ Air Motor Stroke 120§®
Airless Pump 68:1
HK-681
  • Low-noise design to remove hearing trouble
  • High pressure pump of 442kgf/cm©÷
  • Reduced freezing with mounted air jet system
  • Dual position type
  • Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint
  • Application : Container, Pier¡¤Pipe coating, Drum coating, Heavy anti-corrosive coating
  • Technical Data
Part No. (HK-681)
Pressure Ratio 68:1 Max. Discharge Pressure 442kgf/§² Weight 85§¸
Max. Delivery 18§¤/min. Noise 70~80dB
Operating Air Pressure 3~6.5kgf/§² Dimension(L×W×H) 68×72×120§¯ Air Motor Stroke 120§®
Airless Pump 67:1
HK-671
  • Low-noise design to remove hearing trouble
  • High pressure pump of 469kgf/cm©÷
  • Reduced freezing with mounted air jet system
  • Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint
  • Application : Shipyards, Construction, Metal structure, Heavy anti-corrosive coating, High viscosity coating
  • Technical Data
Part No. (HK-671)
Pressure Ratio 67:1 Max. Discharge Pressure 469kgf/§² Weight 121§¸
Max. Delivery 34§¤/min. Noise 80dB
Operating Air Pressure 7kgf/§² Dimension(L×W×H) 72×75×130§¯ Air Motor Stroke 120§®
Airless Pump 54:1
HK-541
  • Low-noise design to remove hearing trouble
  • High pressure pump of 378kgf/cm©÷
  • Reduced freezing with mounted air jet system
  • Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint
  • Application : Container, Pier¡¤Pipe coating, Drum coating, Heavy anti-corrosive coating
  • Technical Data
Part No. (HK-541)
Pressure Ratio 54:1 Max. Discharge Pressure 378kgf/§² Weight 57§¸
Max. Delivery 17.4§¤/min. (120 Cycle) Noise 70~80dB
Operating Air Pressure 7kgf/§² Dimension(L×W×H) 61×72×118§¯ Air Motor Stroke 120§®
Airless Pump 42:1
HK-421
  • Convenience of repair & maintenance
  • Low-noise design to remove hearing trouble
  • Reduced freezing with mounted air jet system
  • Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint
  • Application : Container, Pier¡¤Pipe coating, Drum coating, Heavy anti-corrosive coating
  • Technical Data
Part No. (HK-421)
Pressure Ratio 42:1 Max. Discharge Pressure 273kgf/§² Weight 80§¸
Max. Delivery 20§¤/min. Noise 70~80dB
Operating Air Pressure 3~6.5kgf/§² Dimension(L×W×H) 68×72×100§¯ Air Motor Stroke 120§®
Airless Pump 33:1
HK-331
  • Low-noise design
  • High pressure pump of 214kgf/cm©÷comparing with small size pump
  • Low-freezing design
  • Application : Timber products, Finishing coating, Heavy anti-corrosive coating
  • Technical Data
Part No. (HK-331)
Pressure Ratio 33:1 Max. Discharge Pressure 214kgf/§² Weight 15§¸
Max. Delivery 4.2§¤/min. Noise 70~80dB
Operating Air Pressure 3~6.5kgf/§² Dimension(L×W×H) 44×42×87§¯ Air Motor Stroke 75§®
Check Mate Pump
HK-CM-800
  • Resin painting for LPG carriers
  • Air motor can be rotated 90¢ª
  • Powerful feeding of high viscosity fluid
  • Low-noise design to remove hearing trouble
  • Low-freezing design
  • Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint, Sealant, Adhesive, Inks, Mastics, Lubricants, etc.
  • Application : Shipyards, Construction, Metal structure, Heavy anti-corrosive coating, High viscosity coating
  • Technical Data
Part No. (HK-CM-800)
Pressure Ratio 52:1 Max. Discharge Pressure 338kgf/§² Weight 110§¸
Max. Delivery 24§¤/min. Noise 70~80dB
Operating Air Pressure 6.5kgf/§² Dimension(L×W×H) 68×72×140§¯ Air Motor Stroke 120§®
Welcome to HANKIL PRECISION
We are the pioneers that seeks endless
development in overcoming any challenges.
Please check Company introduction
and CEO greetings of HANKIL PRECISION.
Do you have any questions about
HANKIL PRECISION?
If you have any questions,
we will respond kindly and precisely.
Please feel free to contact us.
If you check the map before you visit
HANKIL PRECISION,
you will find it more easily.
If you have any questions, Please feel free to contact us.
HANKIL PRECISION Business Hours
Weekdays 10 am to 7:30 pm / weekends and holidays close
051.831.4141~4
fax 051.831.4145
Headquarters Factory
84, Noksansandan261-ro, Gangseo-gu, Busan, Korea | Tel. +82-51-831-4141~4 | Fax. +82-51-831-4145 | Website. www.han-kil.com | E-mail. master@han-kil.com
copyright¨Ï2017 Headquarters Factory all rights reserved.